|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » evo 5 chip for c20let wot are peoples thoughts? » Post Reply
|
dale87 |
posted on 9th Nov 10 at 08:29 |
im thinking of going either evo 5 or eds phase 3 chips but i also have a dastek unichip that i was thinking of fitting instead. | |
C2VXL |
posted on 8th Nov 10 at 22:47 |
Found it difficult getting a nice easy medium in pressure between cruising and under load. Once I put on the Walbro, Cossie reg and Cossie plugs we got it as best possible. People may differ and each car is different but running that sort of power on an aftermarket chipset you will never get the fuelling perfect across the range anyway. I'd have to agree with you there. For what you pay in comparison to aftermarket managment, it's a cheap alternative. Getting rid of the evo5 chips are on my 'to-do' list. | |
danny678uk |
posted on 8th Nov 10 at 21:14 |
ya ive been told tht will just run evo 5 then. | |
thegsi |
posted on 8th Nov 10 at 21:09 |
quote: No problem. Bare in mind even though people do run 300+bhp on phase 2, they tend to run comfortably up to 280bhp so if you're aiming for 300bhp, Evo 5 is your best bet. | |
danny678uk |
posted on 8th Nov 10 at 21:03 |
right will have ago with the chip set if not happy will run a phase 2 chip set thanks for your advice ma8. | |
thegsi |
posted on 8th Nov 10 at 20:59 |
quote: Found it difficult getting a nice easy medium in pressure between cruising and under load. Once I put on the Walbro, Cossie reg and Cossie plugs we got it as best possible. People may differ and each car is different but running that sort of power on an aftermarket chipset you will never get the fuelling perfect across the range anyway. | |
danny678uk |
posted on 8th Nov 10 at 20:54 |
yes got arp rod bolts ,flywheels bolts oh and also got a walbro fiel pump. also wot sort of fuel issues did u have cheers? | |
allyp |
posted on 8th Nov 10 at 20:53 |
my brother is running evo 5 in his calibra turbo, he has no issues with it, it runs well although he hasn't had it on the rollers to prove otherwise. definite improvement upon standard although we did have to add the frontera intercooler, afpr, enlarged top hat and boost pipes and 3" exhaust and k&n panel filter | |
wwwNOOBcom |
posted on 8th Nov 10 at 20:49 |
even phs2 would see 300 on a good turbo | |
thegsi |
posted on 8th Nov 10 at 20:48 |
Yes you will be able to run 300bhp on the Evo 5. I had many fulling issues when mine went on Evo 5 and when it started touching 300bhp. My main advice would be make sure you run some updated fuelling components like a Walbro fuel pump, decent FPR and some cold ish plugs. | |
Jambo |
posted on 8th Nov 10 at 20:43 |
As said my memory is sketchy as I sold mine a few years ago but from memory the evo5 gives that figure so long as you had the inlet cam a decent exhaust and the other bits you had should just garuntee that. You got arps? | |
danny678uk |
posted on 8th Nov 10 at 20:31 |
i jsut want a good healthy 300bhp from the engine will be running stanard turbo wid vxr injectors 3 inch top hat xe inlet cam with vernier. and a cossie actuator so you would recommend it then? cheers for ur reply. | |
Jambo |
posted on 8th Nov 10 at 20:28 |
*good | |
danny678uk |
posted on 8th Nov 10 at 20:26 |
hi im after some thought on these chips was woundering wot ppl know abowt them r they a gud chip set to use? |