|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » AT Power throttle bodies » Post Reply
|
Robin |
posted on 28th May 09 at 14:29 |
They're threaded, you screw them onto the rampipes, so the notches are for gripping them to make sure they're tight. | |
gazza808 |
posted on 28th May 09 at 14:24 |
this may be a silly question buh why are there notches on the air horns? | |
Robin |
posted on 28th May 09 at 14:22 |
| |
gazza808 |
posted on 28th May 09 at 14:21 |
yeah huh. | |
Ellis |
posted on 28th May 09 at 14:20 |
Ah ok, thanks | |
broster |
posted on 28th May 09 at 14:17 |
thats a duratec engine | |
Ellis |
posted on 28th May 09 at 14:17 |
Are the quoted curves above for the c20xe? | |
broster |
posted on 28th May 09 at 14:14 |
you can get a complete NEW jenvey taper throttle body kit (manifold, linkage, air horns, decent tps, postage, filter and base plate) for £640 delivered? | |
gazza808 |
posted on 28th May 09 at 14:12 |
they are nice, but i can't justify the extra 450quid over what i can get tapers for. | |
broster |
posted on 28th May 09 at 14:11 |
quote: port shape, injector location, spindleless butterfly, as the body itself is so compact there is more room for a longer ram pipe (trumpet) hence more velocity.... these are 38mm bodies, should see more power than a 45mm taper. its mid range where the gains are going to be [Edited on 28-05-2009 by broster] | |
broster |
posted on 28th May 09 at 14:09 |
at the moment, bodys, tps, fuel rail, linkage, air filter and base plate, basically everything needed bar injectors and management is £1090.78. | |
FruitBooTeR |
posted on 28th May 09 at 14:05 |
Why would they see slightly more power than the equivilant Jenvey tapers? | |
Nick-S |
posted on 28th May 09 at 14:03 |
quote:that it going to sound :!:cool: | |
Torsa g |
posted on 28th May 09 at 14:02 |
like to see the gains on these and prices of wat they have to offer | |
Eck |
posted on 28th May 09 at 14:02 |
They look like a nice piece of kit! By reasonably priced for an XE, what would the damage to the wallet cost? | |
broster |
posted on 28th May 09 at 14:00 |
Had the boys from AT Power down a week or so ago showing us their range (of throttle bodies), really nicely machined bits of kit, they have a listing for the c20xe, and are quite compact and reasonably priced! |