|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » Computer Help » Post Reply
|
MarkW |
posted on 7th Aug 04 at 15:31 |
2 b honest m8 i'd cap limit the drive stick it to master, and don't run any other drive's thn go into bios and detect hard drive - should sort it no probs :thumbs: | |
MarkW |
posted on 7th Aug 04 at 15:27 |
u may need to cap limit the drive also m8 - if u look on the sticker on the drive it will tell u how to do this - if it's an old m/b especially PII this is more thn likely the problem......... | |
James_DT |
posted on 7th Aug 04 at 15:22 |
It shouldn't be a problem, no. | |
Richie |
posted on 7th Aug 04 at 15:21 |
Could be the IDE controller at a long shot. | |
Darren |
posted on 7th Aug 04 at 15:16 |
Ive gone thru all that stuff already, when you first switch it on it tells u on screen that its detected both the HD's but then goes onto the screen above and freezes :boggle: | |
MarkW |
posted on 7th Aug 04 at 15:09 |
press 'Delete' on startup or F2 depending on ur board, just keep pressing it as soon as u fire comp up - until u get a blue screen wiv loadsa options - u might hav to go into standard cmos settings and press enter on the drive's to redect them, or it might have an auto ide detection facility - but it's obvious it ain't picked it up as image above says 20gb pri master - Have u set new drive to master or is it slave? + hav u got any other drive's in machine?? | |
Darren |
posted on 7th Aug 04 at 15:03 |
this is how far i get | |
MarkW |
posted on 7th Aug 04 at 14:47 |
I just read through ur post again - i think all u need to do is detect it in the bios and u'll be reet :thumbs: | |
MarkW |
posted on 7th Aug 04 at 14:30 |
Sounds as tho it ain't just ur hard drive tht's fucked :( lol try startin the computer with everything minimal - in otherwords unplug all ur drive's except this new hard drive, take all pci cards out except ur graphics, and if u've got more thn one stick memory just run it with one - thn fire up p.c and make sure all ur bios settings are correct - thn see whether it will go through POST without any problems. if it looks ok, start putting stuff back in until it messes up again - thn u'll find the problem, it tht don't work - u'll need to start puting different parts into test them, ie PSU, CPU & Memory (rob thm from another machine if u can) if none of tht works i'd reckon ur motherboard is on its way out - but test everything else first :thumbs: | |
Darren |
posted on 7th Aug 04 at 14:22 |
Just bought a new 40Gb hard drive for my pc as the old one died. Fitted it all etc but when you turn the PC on it detects it ok when u first turn it on but then as it starts loading the white text on black screen, checking processor, memory etc it gets to the hard drive and freezes.. :boggle: |