oh and just be very careful when decompressing the springs cause it will scare the sht out of ya when it pops!!

Putting 60mm springs on standard shocks will put strain on ure shocks, the lifetime of ure shocks will depend on how u drive.
As for fittings, piece of piss. I fitted my bros clio front springs onto standard shocks within 15mins, all u need is a spring compressor, socket set and a jack.
Halfords have the spring compressors for 18 squid. :thumbs:

it was ats i went to to get my tracking sorted after lowering 40mm onsprings/shocks and putting on 17s, they said tracking was fine! :|

then the guy said i too kthe car for a drive and the fornt end is far too stiff and boncing around, your car will get stress cracks all up the front in a month or two

the springs/shocks on the front are brand new, gmax shocks, fk -40mm springs ,wil they soften off and drop a bit mpre after a few hundretd miles? they have done about 80 just now

he said the rears fine, the rears got same shocks and gmax springs, but the diff is the springs are used no new

[Edited on 17-04-2004 by Go3asy]

Go to ATS, they fitted mine for free, after I nessed up fitting it myself, cos I needed different rubbers. I drove in there with the exhaust on a bit of string and asked them if they could fix it... Did a good job, especially as I didn't have to pay!

yeah i'm gonna change the exhaust rubbers. Wot are the best 2 use ???

... just remember not to park like that when u frop 60mm or you'll rip off the front bumper :) and your zorst will hit the ground i think get some shorter rubbers

just buy some gmax shockers from larkspeed.com about 130 for all 4

i got them just now, gmax rear springs and fk front -40mm, on 17s, fucking bumpy!! front end bounces all over the place, the garage said afetr a couple of months the fornt of my car will get stress cracks!?? will the springs/shocks soften off ? because they are brand new, appart from the rear springs they aint new, and the rear is fine, the rear shocks are new tho, hopefully they will wear in and it will drop a bit more but i duno, but will the fornt springs/shocks soften after a few 100 miles becaus eits rock solid just now

cheers for comments !!!

gonna try some of that scratch-x on it 2 get swirls out and then give it a couple of coats of gold class wax, should bring it out well !!

lowered on 60mm without shocks isnt a really good idea in the long run. Should really save for some shocks!!

Looks good though. Everyone has to start somewhere!!

Well, I did mine, it was really easy. You need to pop down to Halfords and get some axle stands, a Haynes manual, a few cans of WD40 and some spring compressors... The backs take about 15 mins to do, and the fronts took me about 30 mins...

Man, thats a clean car :cool:

can't afford fittin neither !!! might have a go myself one day. can't be that hard surely.........(famous last words !!)

You won't need the shocks, they should pop on the originals ok, the ride may be a bit harsh though...

got some 60mm springs 2 go on but can't afford the shockers at the min !!! Car needs a good polish though, cos its full of swirls !!

Looks good, does need to be lowered, I might have some -40mm Springs for sale in a few weeks time, depends on how the motor looks with 17's on it... :)

looks nice

I know it's not the most modified car on here. I know the exhaust sits too low and it seriously needs lowering, but it's my first car and i'm happy with what i've been able to afford to do so far.

Any comments welcome !!





I'll take some more when my meguiars turns up !!