![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Not logged in [Login - Register] |
![]() |
You Are Not Registered Or Not Logged In |
![]() | ![]() |
Corsa Sport » Message Board » General Chat » Is it m-tec which make engine mounts etc..? » Post Reply
|
Kris TD |
posted on 2nd May 03 at 12:43 |
also the kit for the 2.0 dti aswell please. | |
Kris TD |
posted on 2nd May 03 at 12:11 |
pete, how much is the kit from you? | |
Kris TD |
posted on 2nd May 03 at 11:52 |
it was cossvaux that said it costs 975 quid, its for the 2.2 dti conversion with f28 box. | |
Pete |
posted on 2nd May 03 at 10:38 |
And as I explained about the Powercap, it does add power, which the ecotec pipe doesn't. How can you compare a cast plenum chamber with a bit of rubber pipe? | |
Pete |
posted on 2nd May 03 at 10:37 |
As I explained, we don't sell tapered hubs. They break and cannot handle the power. I have found this from experience and we have dozens of customers changing from tapered shafts to ours after problems. The kit would be cheaper with tapered hubs but we couldn't confidently sell them. | |
BeArDy |
posted on 2nd May 03 at 10:04 |
Shafts and hubs worth £360, corsarus 230 | |
Dan_Corsa |
posted on 2nd May 03 at 08:47 |
i got my fittin kit from pvd which arrived wednesday,i must say i am glad i spent the money and bought this kit,save's alot of time and even comes with a fittiing guide,which means most people with a bit of engine knowledge can fit a 2.0 16v xe/let engine to there corsa | |
Pete |
posted on 2nd May 03 at 08:41 |
quote: Ok well if you break down a Corsa kit to the main parts: Shafts and hubs worth £360 and a Powercap worth £120, you're getting engine mounts, brackets for anti roll bar, an induction kit and a fitting guide for £95. That seems pretty good value to me. | |
Pete |
posted on 2nd May 03 at 08:38 |
I appreciate that the kits we sell aren't the cheapest parts on the market but they do have a number of unique advantages: | |
Fad |
posted on 2nd May 03 at 08:38 |
u can get engine mounts made up a lot cheaper than buying through PVD etc Lee Mitchell can make them at a fraction of the cost , best off askin him :) | |
BeArDy |
posted on 2nd May 03 at 08:19 |
well dident know that :thumbs: | |
Pete |
posted on 2nd May 03 at 08:00 |
Kris - PVD are the sole UK importers, so you can't buy direct from M Tech. | |
BeArDy |
posted on 2nd May 03 at 07:55 |
depend on what your fitting but heres what i would do. | |
Akeemking |
posted on 1st May 03 at 19:05 |
http://www.mathijssentechnics.nl/ | |
Joff |
posted on 1st May 03 at 18:44 |
Contact PVD. 01604 797960 | |
Kris TD |
posted on 1st May 03 at 18:39 |
the fitting kit for the engine i want is only available through a company called m-tec, can get it from other places but its nearly a grand, be cheaper direct from them, any one know how i can get hhold of them?/ think its a dutch company. |