|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » FK 3pc. strut braces kit – HELP! » Post Reply
|
MattyB |
posted on 25th Oct 03 at 11:46 |
quite ironic coz only one i found impossible to do was the rear! :lol: took ages, but did get all 3 on before i stripped my car down. | |
MattyB |
posted on 25th Oct 03 at 11:45 |
The front upper one requires the removal of the induction pipe and fuel RON switch to be removed before fitting. The front upper brace shud then go straight, attatching to the 2 suspension turret bolts on either side. | |
vitasport |
posted on 25th Oct 03 at 10:29 |
cool! i'll do that:thumbs: anyone else could help:cool: | |
Adam-D |
posted on 25th Oct 03 at 10:25 |
u2u mr2vh <spelling | |
vitasport |
posted on 25th Oct 03 at 10:15 |
also try to contact FK directly. nothing :( can some one please help:boggle::boggle::boggle: | |
vitasport |
posted on 25th Oct 03 at 09:59 |
Just received my 3pc. strut brace kit from PVD. Fitted the rear one fine with no problem. But the front lower and upper ones seem to be a mystery. Where is the lower one supposed to bolt on to? The only place that it seems to fit will have contact with the exhaust system. Do I need spacers of some sort? And the upper one doesn’t clear all the eng. components. I didn’t get any blots or nuts with the kit. Do I need them? Or do I use existing OEM hardware? Had send PVD an e-mail about this, but no reply. Can someone please shed some light on this subject? :boggle: Thanks! |