|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Bit of help needed with subs. » Post Reply
|
ajscorsa |
posted on 22nd Aug 03 at 13:57 |
cheers m8. think im gonna stick with 2 12"s sounds like a lot of work for something that aint to special | |
TOMAS |
posted on 22nd Aug 03 at 11:50 |
Two tens and one fifteen would be LOADS better. Crossover the tens at 105hz lowpass and 55hz highpass in a mid to large box (you will either need a good cossover for this OR two crossovers), then run the fifteen at 55hz lowpass. | |
ajscorsa |
posted on 22nd Aug 03 at 07:05 |
so you think it can be done 2 12" and 1 15 would look better anyhoo i think | |
CopyWrite |
posted on 21st Aug 03 at 23:04 |
i have 2 12's but 2 15's and 1 12 will seem abit 2 heavy for the 12's maybe one 15 and 2 12's...all sealed. | |
ajscorsa |
posted on 21st Aug 03 at 21:45 |
anyone else have views on this ?? | |
Sparco |
posted on 21st Aug 03 at 15:41 |
i'm not sure, i did think of mixing sub sizes for my install but i looked through all my mags and on internet at installs and no one mixes sub sizes so didn't in the end. Got two 12's which everyone reckons is the best of both. to be honest they do seem to perform damn well with all bass notes so i'm glad i didn't mix sizes. | |
ajscorsa |
posted on 21st Aug 03 at 15:23 |
thats what i thought. | |
Sparco |
posted on 21st Aug 03 at 13:55 |
If you have two different amps, one for the two 15s and one for the 12 then you could set the variable crossovers on each amp so that the 15's only got say under 60hz and the 12's got everything under say 90hz. That way the 15's would only get the really low notes which they are good at and the 12 would get the higher notes which tend to be faster. That might work or am i talking bollocks? | |
ajscorsa |
posted on 21st Aug 03 at 11:49 |
can you not like get a cross over thing to split the kind of bass you want. or is it gonna be too much air moving about | |
mentalcorsa |
posted on 21st Aug 03 at 10:52 |
dont mix sub sizes m8 | |
ajscorsa |
posted on 21st Aug 03 at 09:15 |
ttt | |
ajscorsa |
posted on 21st Aug 03 at 07:47 |
right imstarting to design my install. |