|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Reading ECU fault codes.....! » Post Reply
|
miles |
posted on 16th Aug 03 at 15:49 |
There is a 9 pin plug (3x3 pins) coming off one of the main ecu plugs. The wire i mentioned above needs earthing to make the warning light flash. The flash sequence is then counted. | |
CRB 553 |
posted on 16th Aug 03 at 15:37 |
so assuming the connector cant b used, my ecu has 2 connectors goin into it, r u saying if i earth a particulare wire coming from the ecu that it will flash the codes out ? | |
miles |
posted on 16th Aug 03 at 15:11 |
There is basically 1 wire from the ecu that needs to be earthed. This will make the ecu warning light flash. The wire goes from the ecu into the 9 pin plug (3 rows of 3 wires) the warning light wire is number 6 on that plug and is brown/blue, I think this is a ground, so you need to use a permanant live. Number 9 wire brown/yellow is the diagnostic wire that needs earthing to read the codes out. | |
CRB 553 |
posted on 16th Aug 03 at 14:42 |
turns out diagnoistic connector is fooked so i carnt check it out, is it possible to connect direct to the ecu and see what ots problem is ?? | |
Paul H |
posted on 16th Aug 03 at 13:40 |
quote:heah kerry how about me and you go out sometime???:! | |
Kerry |
posted on 15th Aug 03 at 20:44 |
:o | |
BeArDy |
posted on 15th Aug 03 at 20:25 |
quote: :lol: she will get it soon | |
Kerry |
posted on 15th Aug 03 at 20:11 |
:boggle: | |
Paul H |
posted on 15th Aug 03 at 20:05 |
quote:if you want it you can have it:lol: | |
Kerry |
posted on 15th Aug 03 at 19:55 |
http://www.topbuzz1.carenthusiasts.co.uk/info/fault_codes/fault_codes.htm | |
BeArDy |
posted on 15th Aug 03 at 19:43 |
ask kerry shes the Fault code reader queen :thumbs: | |
CRB 553 |
posted on 15th Aug 03 at 19:42 |
How do i do it. Av read many guides on the web and apparently i have to short pins 5 and 6 on the 16 pin connector to the left of the fuses, but theres no pin 6 just 5. |