|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Bad boy bonnet and scoop DIY » Post Reply
|
vauxtillidie |
posted on 24th Jun 03 at 06:59 |
u can probably hire a mig welder which wud do the trick, ive got one already so that wasnt a problem | |
Jafster |
posted on 24th Jun 03 at 05:18 |
vaux where can you get welding tools for the job then i would have a go myself - | |
vauxtillidie |
posted on 23rd Jun 03 at 21:36 |
start by cuttin out some metal to go accross the lights, grind off paint to bare metal where u will be welding then clamp the metal in place while u weld it on. grind down welds then use body filler to smooth it all into ur bonnet, sand down till smooth with no bumps. | |
leeboo |
posted on 23rd Jun 03 at 21:29 |
where do u start on the bad boy though. I could really do with step by step guidance starting with step 1. cheers mate | |
vauxtillidie |
posted on 23rd Jun 03 at 21:03 |
heres a pic of when i was mid way thru my badboy bonnet, its finished now but i aint got any pics of it at the mo but its not that hard altho sandin by hand is a pain, lukily i had the use of bodyshop tools e.g DA sander but i did the welding myself at home | |
leeboo |
posted on 23rd Jun 03 at 20:21 |
Has anyone attempted any of the above on there bonnet?? |