|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Removing pillars to paint - how do you remove A pillar? » Post Reply
|
Jason x |
posted on 15th Apr 15 at 22:56 |
Thanks for the replies I've had it all out and painted all the pillars and roof lining now :) | |
flame |
posted on 15th Apr 15 at 11:06 |
You need to remove the plastic circle at the top of the A pillar trim- you can use a small flat blade screwdriver to do this. There is a T25 torx under there and the rest is held on with the white trim clips that pull out. Once the screw is out, pull the piece of trim sharply away from the A pillar and then up to get it from behind the side of the dash. | |
random dav |
posted on 8th Apr 15 at 13:11 |
Screw will be a torx bit. | |
Jason x |
posted on 8th Apr 15 at 11:08 |
Also I should add, I'm aware of the circles at the top of the pillars and that's where I'd asume some the screws are under but the plastic circles don't seem to be movable to get to screw? | |
Jason x |
posted on 8th Apr 15 at 09:43 |
As the title says, how do you remove the A pillar without breaking anything can't see any clear way to get it off don't want to just rip it off and break clips. |