|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Rear Shock Bolt Problem » Post Reply
|
random dav |
posted on 7th Feb 15 at 06:24 |
Shorter exhaust rubbers, or poly mounts. Also put some rubber or similar on the rear beam to pad it. | |
oJNAo |
posted on 6th Feb 15 at 22:24 |
quote: I did think that when I gave it a little test around after, was too dark too get under and check. Quickest way to fix it? Just give it a couple knocks with a rubber hammer so that the exhaust is out of the way? | |
johnny86 |
posted on 6th Feb 15 at 20:53 |
Knocking could be exhaust on axle | |
oJNAo |
posted on 6th Feb 15 at 19:59 |
Ended up with a mate holding the shaft tight with two very tight mole grips while I undid the bolt. | |
andy_mk3 |
posted on 6th Feb 15 at 19:10 |
Get your grips on the shaft of the shock, should be able to get a tighter grip plus you can get a socket on the nut. | |
corsa-torque |
posted on 6th Feb 15 at 18:36 |
grinding it off is a bit cowboy, but would work. | |
oJNAo |
posted on 6th Feb 15 at 14:58 |
Trying to remove the rear shocks on my b and even though I'm holding the strut with mole grips I can't undo the bolt. |