corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Poly race bushes » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

carl roper

 posted on 20th Jan 15 at 15:07

Yes even worse my tie bars had been machined down to give extra castor


Dave_1987

 posted on 19th Jan 15 at 18:09

Thanks mate. Did you have this problem?


carl roper

 posted on 19th Jan 15 at 17:51

You need to bolt it
Loosely to the lower arms then use a pry bar and leaver it into position to bolt up to on the cross member


Dave_1987

 posted on 17th Jan 15 at 19:59

Is no one using the poly race tie bar bushes or has had no one had this issue before.


Dave_1987

 posted on 15th Jan 15 at 21:34

Hi all. I have got an L reg corsa with the early front suspension set up and I have been at work tonight trying to fit my new bushes. I have got the poly race ones from rally design. I have fitted them into the suspension arms and the the front tie bar brackets but when I bolt the arm on the tie bar bracket bolt holes are about half an inch out or if I put the tie bar bolts in first the I cant get the arm in.
I cant work out where I am going wrong it just wont fit. I had to down tools in a strop like a kid and leave my car on the lift in the hope someone has had this issue before and its easy to sort or have I done something wrong.
Any help or comments would be appreciated.