corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Seat removal » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Ian

 posted on 6th Oct 13 at 13:05

Just use the biggest drive you can, its T50 ish isn't it?

Half inch drive on a big breaker to start them all, be reet. They're only going to chew if you're straining with not much leverage and it slips.


Haimsey

 posted on 6th Oct 13 at 11:30

I found it more hassle but easier and less likely to knacker up the torx bolts by undoing the four that hold the seat to the subframe and then deal with the subframe as a seperate job.


csifku

 posted on 5th Oct 13 at 22:52

quote:
Originally posted by RCorsa
quote:
Originally posted by csifku
what car ? corsa b or corsa c ? I know about corsa b, put some WD-40 under the car where r the bolts and use torx i think is T30 if im not wrong .... , tka ethe two rear bolts out and lift the seat and slide it forward and its out

Good point! I presumed it was a C for some reason... Anyway yes, just two bolts on a B, four on a C.


its just hard to asnwer mate when we dont know what car they talk about for :-/


RCorsa

 posted on 5th Oct 13 at 19:07

quote:
Originally posted by csifku
what car ? corsa b or corsa c ? I know about corsa b, put some WD-40 under the car where r the bolts and use torx i think is T30 if im not wrong .... , tka ethe two rear bolts out and lift the seat and slide it forward and its out

Good point! I presumed it was a C for some reason... Anyway yes, just two bolts on a B, four on a C.


Jamie-C

 posted on 5th Oct 13 at 18:15

Be careful, they snap


csifku

 posted on 5th Oct 13 at 15:16

what car ? corsa b or corsa c ? I know about corsa b, put some WD-40 under the car where r the bolts and use torx i think is T30 if im not wrong .... , tka ethe two rear bolts out and lift the seat and slide it forward and its out


corsajay88

 posted on 5th Oct 13 at 07:33

Put the little red safety catches in the pretensioner before you do anything. Removing the plastic next to the seat on the door side will give you access to this


RCorsa

 posted on 4th Oct 13 at 16:41

Depending on model if it has airbags disconnect battery, unplug pre-tensioners. Unscrew the plastic runner covers, slide seat forward with adjuster, undo bolts, slide it all the way back, undo front bolts. Out it comes, easy enough :)


Anty

 posted on 4th Oct 13 at 12:35


Is there any How to Guides on how to remove a drivers Front seat.. More door

The drivers side is leaning to one side, i heard a pop noise as i sat down.


:facepalm: