corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » problems after engine change 2007 corsa » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

tonyuk1974

 posted on 13th Aug 13 at 10:45

I have sorted the rev counter and have found out that i need to undo engine/gearbox bolts to press the clutch release bearing in order for it to bleed properly, without doing this its impossible to bleed it after engine change. Anyway, im still left with the problem of no power steering and the abs light is still on. Any ideas?


tonyuk1974

 posted on 12th Aug 13 at 17:30

Hi, i have just changed an engine on a 2007 1.4 corsa and am having the following problems. Engines starts and runs but i have no clutch, power steering, or rev counter. The abs light is on as is a light with a steering wheel. Is there a plug that im missing? Can you bleed the clutch in these. The clutch i put in has plenty of life left and the pressure plate was good too. Thanks in advance