yes they r joints stubs and no i don't need to re wire it, all connectors r safe and well secured, got no bare wires, just looks messy :D :lol:

Had probs with the ISO thingy and cut it up...

Thanks for the photos and help guys, ive sorted the problem, i joined the red and yellow from the head unit to the red from the car and its all working fine! :D


Cheers for the quick responses, will stick around the site, seem a freindly and helpful bunch!

You really should tidy up those wires haha

are they joint stubbs i see before my eyes!! oh an that wiring is an aborton get it rewired before ur car set on fire.

I think you'll find the yellow wire is the permanate live...

best get a volt meter or a 12v lightbulb with a spare piece of wire. connect one end to the cars yellow and ground the other to the car body somewhere...

if it lights up without the keys in the ignition then this should be the permante live, now turn the key and start the engine to make sure it does not switch the lightbulb off.

if this is the correct wire then wire both red and yellow wires from the headunit to the cars yellow(permanant live)

this should sort you out... but before you try this, lay off those dog ends in your ashtray.

cheers, have got to go to work now but will take a look this evening :)

Just took headunit out.................:! it was messy, should really think about re wiring it all...





I have got the red and yellow from headunit joined together, and red and yellow from car joined together, then connected both of em....

Ive had to change the layout back to the two red wires connected and the two yellow wires because using the above setup everytime i replaced the face plate on the headunit all settings were reset.

I still ahve to turn to ignition first, so if anyone else can help out in the meantime :)

3corsameal, that would help alot if you could do that.

Gambit, did try that with each different layout of wires i did.

quote:

---

Originally posted by safe_si

quote:

---

Originally posted by 3CorsaMeal
i ripped the connectors off and connected em to the red one i think....

My headunit has constant power, can turn it on without key in ignition.....think the yellow is the ignition live..

[Edited on 24-04-2003 by 3CorsaMeal]

---

Is that a definate think??

quote:

---

Originally posted by Gambit
take the wee yellow out of the big yellow (leave the wee red in) & put the wee yellow into the other red wire that is beside the big yellow

---

Ive tried that layout and it didnt work

---

don't go doing it yet.....just in case,,, i looked at the wiring diagrams from the haynes when i did mine.

I could check for u and get a pic of mine, but it will be tomorrow, cos i going home soon.

quote:

---

Originally posted by 3CorsaMeal
i ripped the connectors off and connected em to the red one i think....

My headunit has constant power, can turn it on without key in ignition.....think the yellow is the ignition live..

[Edited on 24-04-2003 by 3CorsaMeal]

---

quote:

---

Originally posted by Gambit
take the wee yellow out of the big yellow (leave the wee red in) & put the wee yellow into the other red wire that is beside the big yellow

---

take the wee yellow out of the big yellow (leave the wee red in) & put the wee yellow into the other red wire that is beside the big yellow

i ripped the connectors off and connected em to the red one i think....

My headunit has constant power, can turn it on without key in ignition.....think the yellow is the ignition live..

[Edited on 24-04-2003 by 3CorsaMeal]

OK this is a photo of waht ive got, the red and yellow both from the head unit cant connect because they are both male connectors, or am i
understanding it wrong?

This is how ive got it connected

turn the key on then turn it bk, i cant turn mine on without the key been tunrned once. not a big prob, the way rnd it is 2 run a sep live fomr the battery too the h/u :D jsut remember too hold the off butotn or turn the "demo" thingy off

join the red and yellow from headunit and connect to the cars live!

This is the first time ive ever done anything with my car, and am having problems with installing a new sony cdx mp40. Ive gone through the instructions that came with it and the tutorials and help other people have had from these forums and cant find an answer.

I want to be able to turn it on without having to turn to ignition first. Ive tried every combination of the red and yellow wires which are for continous live and switch between.

I understand that an M reg corsa 1.2 breeze does not have an acc position with the key so have set the wires how they say to in the instructions, but it still wont turn on without turning to ignition first :(

any feedback would be greatly appreciated! :)

first post and first mistake, think should be in ICE and electrics section, sorry

[Edited on 24-04-2003 by safe_si]