ok if you didn't find what you are after drop the ECU out, grab the relay module out from behind it and grab the brn/wht & brn/red ( could also be brn/org) earthing either will cycle the locks.

I found the bit i was looking for on that site mate it was under the members section and downloads. It provided the instructions for the fitting of the toad alarm and i also downloaded the information on the vauxhall corsa central locking system. It listed all the info i was after including the wires i need to use.

Problem solved,

Cheers,

ALan.

AH! sorry erm you need to buy a haynes manual for what you need, gives you full wiring diagrams.

do they have one for toad mate and is it any good?

I got an installation manual with the alarm, which was a photocopy of the one that goes to the fitting companies. It only tells you about the wires on the alarm however and doesnt provide any information on specific vehicles.

Does this site download have that sort of content?

i had to go to http://www.caralarms.org and pay £5 to download the installation manuals.

I have a 1.5TD LS 1993.

It came with central locking and dead locks, i will be fitting a toad alarm (C5) soon and was wondering if anyone could tell me which of the wires in the central locking loom(inside the drivers door) are used to the alarm to allow the locking/unlocking to be done remotley.

thanks,

Alan.