|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Which wires can be used on the central locking to connect to an alarm? » Post Reply
|
Chris R |
posted on 13th Apr 04 at 10:07 |
ok if you didn't find what you are after drop the ECU out, grab the relay module out from behind it and grab the brn/wht & brn/red ( could also be brn/org) earthing either will cycle the locks. | |
alnmcn |
posted on 20th Apr 03 at 10:33 |
I found the bit i was looking for on that site mate it was under the members section and downloads. It provided the instructions for the fitting of the toad alarm and i also downloaded the information on the vauxhall corsa central locking system. It listed all the info i was after including the wires i need to use. | |
Richie |
posted on 19th Apr 03 at 22:38 |
AH! sorry erm you need to buy a haynes manual for what you need, gives you full wiring diagrams. | |
alnmcn |
posted on 19th Apr 03 at 19:46 |
do they have one for toad mate and is it any good? | |
Richie |
posted on 19th Apr 03 at 19:36 |
i had to go to http://www.caralarms.org and pay £5 to download the installation manuals. | |
alnmcn |
posted on 19th Apr 03 at 19:33 |
I have a 1.5TD LS 1993. |