corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Hazard switch - name the wires - electronics help » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

John

 posted on 15th Sep 11 at 14:24

Get a multimeter on the other end of the wires you've cut off.

It'll be 2,3,5 or 7 you need though, i'd just touch them until the hazards come on.


Haimsey

 posted on 15th Sep 11 at 14:16

Any help on this one.
Current hazard switch has some 7 wires going into it.
The button I have has 2 connections.

Heres an image of the rear of a hazard button.


Need to really get a grip of what does what.
Ive figured there will be a positive and negative, wire from LH side of car and RH side of car, 2 (?) wires for the bulb in the hazard switch itself... but thats all.

1.
2.
3.
4.
5.
6.
7.

Next question - how would i go about connecting the wires i need to keep (because obviously i dont need the wires for the bulb in the switch itself) to a button with only 2 connections?

Hope that makes sense.

Thanks. Marc.