|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Speedline centre caps dont fit now wheels are on the car??? » Post Reply
|
--ToM-- |
posted on 14th Aug 11 at 10:56 |
doesnt need to be packed with grease hence why there called dust covers there to stop dust getting in not to keep grease in, if you pack it with grease ittll just flick all over the inside of the center cap, just pop the dust caps of and pop your center caps on simples! | |
IainL |
posted on 13th Aug 11 at 21:47 |
Ah ok, could be the answer. Strange how all 4 dont fit though. The back dust covers are a lot smaller but my centre caps still dont fit over. I'll try taking the dust cover off one wheel ans see if the centre cap fits. Suppose if I pack it with enought grease it should be ok. | |
Tomm R |
posted on 13th Aug 11 at 20:18 |
It will be the dust covers that go over your hub nut. | |
IainL |
posted on 13th Aug 11 at 19:53 |
Its fronts and backs and they are pushed right on. I'm confused as I thought these were designed for the Corsa B and Nova? | |
sri boy |
posted on 13th Aug 11 at 19:19 |
iff its fronts ure drive shart its sticking out to mutch and its making them not go on | |
tintin |
posted on 13th Aug 11 at 19:18 |
when you say cap i assume you mean the rear dust cap covering the wheel bearing and hub nut assembly? Should that be teh case first ensure that cover is pushed all the way home. If it is maybe you could try flattening it a little or removing it all together. | |
IainL |
posted on 13th Aug 11 at 17:55 |
As above, the centre caps on my Speedlines fitted perfectly when they were on the car. |