corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » H&H ignition dizzy to c20xe » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Jeem

 posted on 5th Jun 11 at 20:46

quote:
Originally posted by ianofbhills
I take it the problem is you are trying to fit a distributor to a dispac engine.

Could be easier to just fit a dizzy exhaust cam if the ball bearing wont move?


Ye dispac engine but the ball bearing moved fine with a couple taps with hammer an punch so thats that problem solved so far


ianofbhills

 posted on 31st May 11 at 18:52

I take it the problem is you are trying to fit a distributor to a dispac engine.

Could be easier to just fit a dizzy exhaust cam if the ball bearing wont move?


Jeem

 posted on 31st May 11 at 16:13

Ok called H&H the day, the guy i spoke to said some customers push the ball bearing down the centre of the camshaft with a gently chap to let the dizzy fit, will try that the night

[Edited on 31-05-2011 by Jeem]


corsadonk

 posted on 31st May 11 at 05:47

Yeah grease would be good, all you need is the temp gauge sensor for the dash. If you can get a old crank sensor cut the wire off that, and not a good one like I did, GM ones are like £70. :(

Have fun. :thumbs:


Jeem

 posted on 30th May 11 at 20:57

Cheers for the reply, its kevxx car am putting together he's got R1 carbs, you say a drop of oil what bout a bit of grease to last longer, also since we're loosing the ecu all of the sensors are unused now ye? as far as ive read its only the starter an altenator wired up


corsadonk

 posted on 30th May 11 at 20:49

Luckly I had some dizzy cams when I did mine. It will be fine to do it, I know it seems wrong.

Might be worth putting a drop of oil in with it, because I think it lubes it.

What carbs are you using?


Jeem

 posted on 30th May 11 at 19:54

Fitting a H&H ignition distributer to a c20xe ive taken off original ecu igntion an the new 'dizzy' wont fit coz the shaft is to long it hits the ball bearing in the end of the cam shaft ive done a search and all i can find is someone says shorten the dizzy's shaft, i dont want to start cutting things until i know for sure, anyone fitted or come across this problem

[Edited on 30-05-2011 by Jeem]