|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » fitting a powerbox » Post Reply
|
Alan2040 |
posted on 31st May 11 at 19:17 |
Inlet fitted now, but now when i start it it bogs down for a few seconds then picks up anyone know why cheers. | |
IvIarkgraham |
posted on 31st May 11 at 17:55 |
join them together using one of the brass pipes on the tb | |
danbo |
posted on 31st May 11 at 15:36 |
anyone know if it makes a difference to join them or not? | |
Alan2040 |
posted on 30th May 11 at 18:34 |
Cheers for the help | |
danbo |
posted on 30th May 11 at 16:26 |
mine are not joined together they just go out to the air | |
smcGSI16V |
posted on 30th May 11 at 16:15 |
Dont wory about the 2 pipes of the tb. | |
Eddx14xe |
posted on 30th May 11 at 16:07 |
You dont need to leave the EGR valve plugged in but it will stop the EML from coming on if you do | |
Alan2040 |
posted on 30th May 11 at 15:44 |
Im fitting a powerbox on my x14xe, just wondering where the 2 breather pipes go off the throttle body, and when you blank the egr off do you leave it on to be plugged in for the sensor cheers. |