|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 1.2 16v to 1.6 16v » Post Reply
|
Jonny.N |
posted on 28th Apr 11 at 20:11 |
any1? | |
Jonny.N |
posted on 27th Apr 11 at 22:34 |
quote: yeah extending the wires etc isnt the problem, when i disconnect the epas from the ecu, theres a red and grey( i think) cable sitting there, surely thats to power it? its where that would get connected to, | |
Jonny.N |
posted on 27th Apr 11 at 22:32 |
i just dont wanna go through the hassle of taking the dash out to swap looms and pas setup etc again, as i did that with my last one a month ago and gave up with it , trying to do it in a way i dont need to swap anything interior wise ideally, so anyone any ideas how to and where to wire epas in? a autospark should be able to do it no probz? | |
AlexW |
posted on 27th Apr 11 at 22:09 |
Meh didnt read that bit. If your rewiring all the ecu plug then yes, it will be fine, But I just wouldn't do it that way as its not perfect :D | |
shaunmods |
posted on 27th Apr 11 at 22:07 |
quote: He doesnt want to change the dash loom you tit :P | |
AlexW |
posted on 27th Apr 11 at 21:55 |
Your have fun with EPAS as changing the dash loom means the fusebox is in the way of the EPAS motor, plus it needs wiring in, as the factory wiring will be part of the dash loom. | |
shaunmods |
posted on 27th Apr 11 at 21:03 |
quote: Shouldnt need to touch the wiring for the EPAS mate. You'll just have to extend the dash loom wiring over to the driver side footwell for the ECU as the loom comes out in a different place in the engine bay on the 1.2 16v's | |
Jonny.N |
posted on 27th Apr 11 at 20:05 |
yeah i seen that, but how do i go about wiring in the epas is what i ment to put :lol: | |
shaunmods |
posted on 27th Apr 11 at 10:30 |
you need to convert the aux belt setup to one from an early corsa 1.4 16v sri so that you can run it without the 1.6 PAS pump. Its all explained in the tutorial in the link above :) | |
Jonny.N |
posted on 26th Apr 11 at 23:11 |
how does that work with epas? | |
Jonny.N |
posted on 26th Apr 11 at 23:05 |
thanks | |
shaunmods |
posted on 26th Apr 11 at 22:19 |
http://www.corsasport.co.uk/board/viewthread.php?tid=601754 | |
Jonny.N |
posted on 26th Apr 11 at 22:05 |
could someone write a list of what i need? and it has epas aswell if thats any use? dont wanna go down the route of taking the dash out to change to normal pas setup, ideally wanna make the epas work with the 1.6 16v if its possible? thanks |