Basicly what I mean is, can I get away with not using the black thing in the pic. And route the cable as normal but at the back the short cable I need to change?

Ok so I need that then? Because when everyone says use a nova short Corsa long, is the for the new Lmf set up or the original rear set up? Ie 1 cable running to back then split at beam with a short cable or with that part so it's 2 separate cables? Cheers

its made for the kit, no car comes with it fitted, i looked for a while before just buying the kit

anyone know where to get the bracket/splitters (black and silver bits) in the pic above without buying the kit?

any cars it comes off?

mines uses the corsa short cable with the adaptors from the kit and then the rear cables are 1 piece from the gte

Hi?

Ttt

Cheers mate is that the long, short or both? Cheers

im using the mtech kit from lmfvauxhall on mines and it tells you to use the handbrake cable from a mk2 gte

Thanks for the input lads :) what about a kaddet one mabie?

I tried using a nova short half and corsa long half and its too tight

mine used the Corsa long cable and the short one off a Nova, my brakes were off a mk3 Astra.

Do you rekon I could use a astra cable then? Or would nova be better? Thanks :)

[Edited on 06-04-2011 by kizzacorsab]

there cav v6 rear brakes on it mate

That's where I got the idea for the mk2 astra cable from yours lol. Are you running astra Gsi setup to?

i use astra mk2 ones on mine mate

I know rear disc threads have been covered a few times, but can't find the information I need.

Sooo... I'm gonna be using the set up off a astra mk3 Gsi on a Corsa beam. These parts are being sourced. But I know you need different cables for different setups. Do I need mk2 astra hand brake cables? Or any other? Also do I need this black tri thing or can it be ran still with out one?



Any other info I could use would be good also.

Thanks kieran