|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Ignition barrel help needed » Post Reply
|
Matty.b1984 |
posted on 4th Dec 10 at 23:41 |
I've taken the barrel out the metal surround and undone the wiring section and transponder, got a second hand ignition barrel, 2x door locks and boot lock with key for £25 just need to get the metal surround now that the barrel slots into. | |
JaffaTB |
posted on 4th Dec 10 at 23:39 |
i sold my barrel with 2 keys and the cowling for 20 quid posted, so wouldnt cost u that much to fix it if you did decide to do it | |
Matty.b1984 |
posted on 4th Dec 10 at 23:31 |
Right ok, cheers for that, would be good to fix it as said before. I'll have a look and see how easy it'll be with column still in place. | |
JaffaTB |
posted on 4th Dec 10 at 23:26 |
yeah you can just replace it with a normal bolt after, you only need to drill whats left of the head once thats off the barrel bit falls off and you can get mole grips on the rest of it | |
Matty.b1984 |
posted on 4th Dec 10 at 23:21 |
That's interesting to know thanks. | |
JaffaTB |
posted on 4th Dec 10 at 23:10 |
it is attached to the column but it can be removed and swapped, you will have to drill it off though as they are attached with snap off bolts | |
Matty.b1984 |
posted on 4th Dec 10 at 23:08 |
Has anybody had there ignition barrel break? |