|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Polybushes (little question/possible dilemma) » Post Reply
|
Terry12 |
posted on 7th Jun 10 at 12:53 |
Cut the ends of the brake pipes and flare new fittings back on. | |
Mike |
posted on 6th Jun 10 at 21:13 |
Ah right, cheers for that :thumbs: | |
Jake |
posted on 6th Jun 10 at 21:11 |
what you suggested. however id undo the trailing arm mount bolt, and the shock bolt on one side so it will give you more room to get the old bushing out | |
Mike |
posted on 6th Jun 10 at 21:08 |
Care to elaborate as to what you're saying yep too? :o | |
Jake |
posted on 6th Jun 10 at 21:02 |
yep | |
Mike |
posted on 6th Jun 10 at 21:00 |
I've just invested in some polybushes for the Corsa and I'm wondering will the rear beam have to be completely removed or would it be possible to just undo the mounts then pivot it on the damper bolt and block the wheels up to avoid having to disconnect all the brakes etc.? |