|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » new problem » Post Reply
|
Sam |
posted on 13th Mar 03 at 09:42 |
quote: Check the cable connection on both clocks and gearbox end. You have to make sure the cable isn't twisted in any way either! | |
Sam |
posted on 13th Mar 03 at 09:40 |
The readings on your new clocks will be out if the W= number is different to your old ones. I was going to suggest taking your old speedo out and putting it in the new clock housing, but I don't think this can be done in Corsas because of the size difference (can be done in Astra/Cavalier etc. though - I will be doing this to my Astra shortly). | |
rollin |
posted on 12th Mar 03 at 21:19 |
no its a whole new set wiv a rev counter worked fine yesterday? maybe i broke the speedo cable would this have the above affect? or maybe the speedo cable isnt quite in, they worked fine first time i put em in | |
Corsa Karl |
posted on 12th Mar 03 at 18:06 |
if they are lockwood corsa120 is right. Make sure you got the right set, its a mistake thats easily done! | |
corsa120 |
posted on 12th Mar 03 at 17:52 |
careful some dials start from 0-10-20-30-40 | |
Sam |
posted on 12th Mar 03 at 17:16 |
Did you change your clocks for another set? Or just put white dials on your original clocks or something? | |
rollin |
posted on 12th Mar 03 at 16:36 |
not the dials as they were workin fine yesterday | |
rollin |
posted on 12th Mar 03 at 16:35 |
did my dials fine however they are nor reading an inncaurate speed, ie im gettin 45 outa 1st in my 1.2 8v, this should be reading bout 32 have i put em back in wrong or something? |