quote:

---

Originally posted by rollin
no its a whole new set wiv a rev counter worked fine yesterday? maybe i broke the speedo cable would this have the above affect? or maybe the speedo cable isnt quite in, they worked fine first time i put em in

---

The readings on your new clocks will be out if the W= number is different to your old ones. I was going to suggest taking your old speedo out and putting it in the new clock housing, but I don't think this can be done in Corsas because of the size difference (can be done in Astra/Cavalier etc. though - I will be doing this to my Astra shortly).

Only other thing I can suggest is putting your old clocks back in, and buy ones with a rev counter that have the same W= number as on your originals.

no its a whole new set wiv a rev counter worked fine yesterday? maybe i broke the speedo cable would this have the above affect? or maybe the speedo cable isnt quite in, they worked fine first time i put em in

if they are lockwood corsa120 is right. Make sure you got the right set, its a mistake thats easily done!

careful some dials start from 0-10-20-30-40
and some go 10-20-30-40

Did you change your clocks for another set? Or just put white dials on your original clocks or something?

not the dials as they were workin fine yesterday

did my dials fine however they are nor reading an inncaurate speed, ie im gettin 45 outa 1st in my 1.2 8v, this should be reading bout 32 have i put em back in wrong or something?