|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » FK Coilovers, Corsa B, Camber out? » Post Reply
|
Danny W |
posted on 7th Nov 09 at 16:54 |
You will need spacers to sort the clearance issue with the FK coilovers if you are using vauxhall offset wheels and 195 tyres, or you'll just have to wind the coilovers up untill the tyre doesn't catch. | |
steve-aoc |
posted on 7th Nov 09 at 10:15 |
i got janspeed coilovers, had to put small spacers on the wheels, did have it set to -2 camber but it wears the tyres out quick, however nothing can touch you round corners, got a garage to adjust it on a laser alinement so they are perfect and i got no rubbing however as its so low i now get a bit of a rub on big bumps on the inner arches but nothing to bad. | |
moka |
posted on 6th Nov 09 at 23:03 |
Ive just tried adjusting the camber, i know what you mean now. | |
moka |
posted on 6th Nov 09 at 21:32 |
Cheers lads, gna give this a go in a bit. | |
redtom |
posted on 6th Nov 09 at 19:40 |
bolt hole is elongated so you can move it in and out, adjusting camber. need to get it set up or will need spacers and run full negative each way to get you by so atleast they are the same each side. | |
moka |
posted on 6th Nov 09 at 19:22 |
Is it the bolt hole or the bolt itself? as the bolts are standard bolts? | |
89RYz |
posted on 6th Nov 09 at 18:23 |
The two bottom bolts on the knuckle. The top one shud be elongated. U need to loosen off the top bolt and pull the shock the way you need the camber to be adjusted (positive or negative). Then tighten the bolt back up. If that makes sense :lol: | |
moka |
posted on 6th Nov 09 at 18:16 |
Hi all, |