corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » wiring in rev counter » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

c20letandy1988

 posted on 11th Aug 09 at 22:16

the green wire will be there but not in use 1.28v and 1.48v have same looms so will be there


ali_corsa

 posted on 10th Aug 09 at 19:24

remove driver side kick panel where the ecu is. there is a white connector block there will be a green wire running into the connector block but nothing coming out of it. its that wire. theres about 6/9 wires going into it, its nothing big and be straight infront of you. run to the connector that goes into the back of the clocks, there is a thread on here somewhere that says to which slot


tocacorsa

 posted on 10th Aug 09 at 18:49

corsa originally had 1.2 8v now got 1.4 16v changed the speedo so i got the rev counter, i was lucky that it wasnt a cable one, but still my rev counter dont work, ive heard about running wire from my coil to the speedo but cant find anything showing how to do this, help?