|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Getting my speedo working. » Post Reply
|
alan-g-w |
posted on 23rd Jul 09 at 16:40 |
Very much appreciated mate. | |
DaveB |
posted on 23rd Jul 09 at 12:25 |
I thought my ears were burning :P | |
alan-g-w |
posted on 22nd Jul 09 at 22:20 |
That's just the thing I was looking for. | |
Terry12 |
posted on 22nd Jul 09 at 16:42 |
Look through post 26 on here Speedo wiring | |
Terry12 |
posted on 22nd Jul 09 at 16:40 |
Cable? | |
alan-g-w |
posted on 22nd Jul 09 at 16:02 |
quote: Excellent, and the cable obviously? I take it my gearbox already has the cog in it? | |
Terry12 |
posted on 22nd Jul 09 at 11:50 |
Aswell as the cog that should be in the F20 gearbox. | |
Terry12 |
posted on 22nd Jul 09 at 11:49 |
If your car runs electronic clocks then all you need is the plug and sender in picture above. | |
alan-g-w |
posted on 22nd Jul 09 at 11:30 |
quote: From a donor car? I didn't think you needed to change the clocks. | |
Terry12 |
posted on 22nd Jul 09 at 11:09 |
Colours on the door loom? | |
DaveyLC |
posted on 22nd Jul 09 at 09:17 |
Colours will be wrong though and if you are buying a £30 transducer you dont want to cook it :D | |
Terry12 |
posted on 22nd Jul 09 at 08:52 |
I think you'll find you can get the plug from some door looms. | |
Terry12 |
posted on 22nd Jul 09 at 08:51 |
Borrowed from Dave B;) | |
DaveyLC |
posted on 22nd Jul 09 at 08:48 |
You need the screw on transducer, the plug, the clocks and the blue/red wire and pin from the connector for the clocks. | |
Terry12 |
posted on 22nd Jul 09 at 08:46 |
You need to buy the specific transducer and get the correct plug, Wire the plug in to your original speedo wiring the plug it in. | |
alan-g-w |
posted on 22nd Jul 09 at 08:33 |
Nobody able to help? | |
alan-g-w |
posted on 21st Jul 09 at 17:52 |
As title, does anyone have a step by step guide to getting an electric set of clocks to work in a corsa with a mechanical F20 gearbox? I know you need a transducer of some sort off of an 'electronic' gearbox (I think) but what specific one is it, and how do you physically go about it? |