Very much appreciated mate.

If it doesn't work I take it it's a case of checking they're plugged in at the back of the clocks then?

[Edited on 23-07-2009 by alan-g-w]

I thought my ears were burning :P

That's just the thing I was looking for.

Thanks mate.

Look through post 26 on here Speedo wiring

It shows how Dave did his.

Cable?
I assume your car is wired for electronic speedo?
If so you fit the adaptor to your F20 then rewire the plug as the Corsa plug is different. You don't need a cable.

quote:

---

Originally posted by Terry12
If your car runs electronic clocks then all you need is the plug and sender in picture above.

---

Aswell as the cog that should be in the F20 gearbox.

If your car runs electronic clocks then all you need is the plug and sender in picture above.

quote:

---

Originally posted by DaveyLC
You need the screw on transducer, the plug, the clocks and the blue/red wire and pin from the connector for the clocks.

---

Colours on the door loom?
I didn't say what wires go to what pin just that the plug is the right fit.

Colours will be wrong though and if you are buying a £30 transducer you dont want to cook it :D

I think you'll find you can get the plug from some door looms.

Borrowed from Dave B;)


You can find them in early Corsa with C14SE engine or apparently some late Novas had them too.

You need the screw on transducer, the plug, the clocks and the blue/red wire and pin from the connector for the clocks.

Then 10 minutes with a soldering iron and some wire.

You need to buy the specific transducer and get the correct plug, Wire the plug in to your original speedo wiring the plug it in.
I'll go find a pic of the part.

Nobody able to help?

As title, does anyone have a step by step guide to getting an electric set of clocks to work in a corsa with a mechanical F20 gearbox? I know you need a transducer of some sort off of an 'electronic' gearbox (I think) but what specific one is it, and how do you physically go about it?

Thanks in advance.