|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Really need some help with 1.2 16v Wiring to XE... With pics... Lots of questions and Llambda sensor » Post Reply
|
Davidkent |
posted on 15th Jul 09 at 13:39 |
up..? | |
Davidkent |
posted on 11th Jul 09 at 16:51 |
SO whats the RON plug? | |
lee mitchell |
posted on 9th Jul 09 at 22:57 |
bullet connector goes to an ign live anywhere on car, ron plug. little brown plug with a on oneside b on the other. the fan plug is on passenger side but the switch is in the rad drivers side | |
Davidkent |
posted on 9th Jul 09 at 22:25 |
And fan switch? The fan plugs in on the passenger side though.. or have i missed something lol | |
Davidkent |
posted on 9th Jul 09 at 22:25 |
quote: Ron plug? Need a relay for the fuel then, no problem. Other to battery Live. Transducer wires are now extended back to the plug in the car, and the Starter and alternator ones are half done so almost there.. So the bullet connector in the bay needs to go back into the car then? and to where? Can't find that thread you said you'd posted it all up in - It'd be perfect then, I'd have it all done on monday, my next day off! Cheers buddy :) | |
lee mitchell |
posted on 9th Jul 09 at 22:17 |
also bullet connector is ign live and 2 pin plug on drivers side is fan switch. six pin plug is for transducer, alternator wire and starter wire. u need to get that back in the bay | |
lee mitchell |
posted on 9th Jul 09 at 22:06 |
that first pic is fuel relay plug. ron plug and the other to battery | |
Davidkent |
posted on 9th Jul 09 at 22:04 |
Can't find it mate? | |
Davidkent |
posted on 9th Jul 09 at 22:00 |
Awesome - I'll try find it :) | |
lee mitchell |
posted on 9th Jul 09 at 21:51 |
i posted how to do it in partyvans post. follow that | |
Davidkent |
posted on 9th Jul 09 at 15:52 |
Cheers buddy - Shame i can't make out my car end... Its being a gay - There's 3 red and blue thin ones on the car end, and only one on the XE loom end - Thats just the start! lol | |
Ste |
posted on 9th Jul 09 at 00:12 |
Have a look here | |
Davidkent |
posted on 8th Jul 09 at 13:57 |
I have all the guides - But only 3 wire cvolours match! |