thanks, ill give that a try and bear the advice in mind mate, ....there is a million topics below this thread but i couldent search for them as the search button is awol :D

Hi, I've just fixed mine.......
Pull the wire from the fan switch in the radiator and short out the connections in the wiring loom connector with a bit of wire, turn on the ignition and if the fan starts then you need a new radiator fan switch.
Point to note, only get one from a dealer as i bought a cheaper one from another source and it didnt fit properly ie the thread MUST go all the way up to the mating face of the switch as it screws into the side of the radiator which is very thin, it also has a better metal washer with a rubber insert.

as title, when the temp gauge goes around /over 100'c the fan does not come on, what are the possible causes of this?
the fuse is fine btw.

thanks :thumbs: