|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » timing on a c20xe » Post Reply
|
john_c20xe |
posted on 27th Feb 09 at 17:52 |
youll have to get some one to hold the cams if thats what you mean as the compression will be pulling them on each other | |
Torsa g |
posted on 27th Feb 09 at 16:56 |
thanks for that as i thought i was going loopy, when i put them on the next tooth they went way out lol, cheers | |
Vaux Lad |
posted on 27th Feb 09 at 16:49 |
The marks do tend to point slightly "inside" of the cam cover marks. | |
Torsa g |
posted on 27th Feb 09 at 11:31 |
ive done this but what im trying to say is that the cam pullys toe in too each other slightly i just want to know if this is corect or not, as the car runs fine when started, but when first starting i get a slight pop and bang out of the inlet side then il let of thenm start again and it will fire up ok, and i have no engine light coming on at all??? its bogling me as to what it is, as it seems as tho theres no lack of power | |
--ToM-- |
posted on 27th Feb 09 at 11:10 |
theres a mark on each pullet n a mark on the rocker cover line them up and then line the mark on the bottom pulley op to the needle thiink next to it cant go rong lol | |
Torsa g |
posted on 27th Feb 09 at 09:34 |
has anyone got any detailed pics as ive done my timing and i think im slightly out, | |
john_c20xe |
posted on 27th Feb 09 at 00:17 |
use an air gun and a decent snap on socket! will reduce rounding off. | |
wozza51 |
posted on 26th Feb 09 at 21:18 |
just hope its not rounded or seized | |
Vaux Lad |
posted on 26th Feb 09 at 21:12 |
A bastid if the splined bolts are rounded :lol: | |
red_top_corsa |
posted on 26th Feb 09 at 20:24 |
tah mate wats the bottom pully like to take off | |
wozza51 |
posted on 26th Feb 09 at 20:23 |
2 marks on the cam pulleys at the top | |
red_top_corsa |
posted on 26th Feb 09 at 20:05 |
hi has any one done thread on cam belt timing for a c20xe mines the early one if that mkes a diffrance |