|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » converting cable speedo to electric » Post Reply
|
andyc1234 |
posted on 8th Nov 08 at 17:59 |
think thats the way i will do it. swap bits of boxes over | |
konlabos |
posted on 8th Nov 08 at 17:56 |
well all the wires go to different places i checked the old and new haynes manual wirin diagrams u'll need tae cut a plug off a car with an electric speedo wit enuf wire to connect ur car wirin to the right places.. coz i bought an electric speedo clocks wit rev counter for my van but havin a spi ecu it didnt have green wire... | |
andyc1234 |
posted on 8th Nov 08 at 17:53 |
i know i can do it by swappng the speedo rings on the diff over thats the only other way. the cable thingy wont fit in as its not gear driven on the electric box its not got teeth for it to run off | |
konlabos |
posted on 8th Nov 08 at 17:50 |
the port where the wiring on ur box where the cable should be can be interchanged its a hassle fitting an electric speedo and then l8r decide upon redtop conversion stick wit a cable more reliable! | |
andyc1234 |
posted on 8th Nov 08 at 17:41 |
had to fit an electric speedo box as it was all i had lying around but have no speedo now. i have a set of electric speedo clocks but need to know what the wirings like i assume something like converting to a digi dash on a nova:wave: |