|
|
|
Not logged in [Login - Register] |
 |
You Are Not Registered Or Not Logged In |
|  |
|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Lower pulley question » Post Reply
|
| DYL |
posted on 26th Oct 08 at 20:59 |
Yep, i got mine off by putting it in 4th gear and foot on the brake | |
| Mr Turner |
posted on 26th Oct 08 at 20:14 |
if you mean the lower crank pulley, then get some one to sit in the car, put it in 4/5th and hold there foot down on the brake pedal then you can undo it by hand, much safer and less chance of stripping the head off the bolt. | |
| John_rdy |
posted on 25th Oct 08 at 07:34 |
Thanks guys. Will attack it tomorrow. Know some cars have the threads going the other way to make me look stupid, im sure thats why they do it anyway. Ha | |
| Mark B |
posted on 24th Oct 08 at 23:08 |
lol not seen it done that way before.......good idea though dont the bolts shear on them quite alot? | |
| Stu_22 |
posted on 24th Oct 08 at 23:04 |
breaker bar wedged to the floor and a flick of the stater job done | |
| Mark B |
posted on 24th Oct 08 at 23:03 |
LOL aye "lefty loosey" can be a cunt sometimes though | |
| John_rdy |
posted on 24th Oct 08 at 22:12 |
Bet im not the 1st or the last to ask this. Lower pulley. Normal thread as in lefty loosey or to get it off am i going to have to turn it righty loosey lol. Cheers john |