|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » C20XE hubs and shafts in corsa carriers +Astra GTE discs and calipers » Post Reply
|
B3KAN |
posted on 19th Jul 08 at 10:03 |
Remove the corsa caliper and carrier and fit the astra ones, SIMPLE :thumbs: | |
SteveoBC |
posted on 19th Jul 08 at 07:35 |
no | |
Limecat |
posted on 17th Jul 08 at 23:00 |
quote: No, you do not hybrid them, you take an Astra GTE/Calibra 16V/Cav GSI etc and unbolt the carriers on 2 x 10mm hex keys IIRC then pull the carrier/caliper etc off as one. Fit the Discs to the Corsa then bolt them straight on. You do not need any Corsa bits. P.S. Do you have ABS? | |
SteveoBC |
posted on 17th Jul 08 at 19:07 |
yeh cheers for that luke i think i got it, have'nt got the 2.0ltr chris astley shafts and hubs yet but i least i know how to fit em | |
luke85 |
posted on 17th Jul 08 at 16:21 |
You will fit the astra GTE calipers, carriers and discs onto the corsa hub carrier. Then a corsa bearing pressed into the hub carrier and your motorsport hub pressed into the center of the corsa bearing. | |
SteveoBC |
posted on 17th Jul 08 at 16:03 |
well iv got both astra GTE carriers discs and hubs, corsa b 1.4 ls carriers discs and hubs | |
B3KAN |
posted on 17th Jul 08 at 14:45 |
quote: No you will need the astra carriers | |
Olsrey |
posted on 17th Jul 08 at 14:36 |
If you have the GTE caliper carriers | |
luke85 |
posted on 17th Jul 08 at 13:34 |
Yes they should fit fine mate | |
SteveoBC |
posted on 17th Jul 08 at 12:41 |
anyone know?? | |
SteveoBC |
posted on 16th Jul 08 at 16:16 |
Oh yeah forgot to ask aswell, got some Astra GTE discs and calipers, will these fit the corsa carriers ok?? | |
luke85 |
posted on 16th Jul 08 at 15:39 |
Yeah the motorsport hubs are sized to press into the corsa bearing. You will need a couple of new bearings though because they fall apart when you press the old ones out | |
johnhara1 |
posted on 16th Jul 08 at 15:19 |
Inner CVs so the shafts fit the gearbox | |
SteveoBC |
posted on 16th Jul 08 at 13:57 |
Hey guys, some peeps will have seen the yellow C20XE corsa im building, going about getting the 2.0 motorsport hubs and 2.0ltr shafts for em from Chris Astley motorsport |