|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » x20xev mount » Post Reply
|
GrolschWalsh |
posted on 11th Sep 09 at 08:03 |
OK, well assume you are ok then as have a tensioner? Do you have any pics? Mine is a type 2 shell.... | |
ripley |
posted on 10th Sep 09 at 23:07 |
iam running pas on mine, i set mine up with the XE setup double crank v pully and v pully alt.i put the ribbed belt setup on first and the alt was hitting the leg.so not a lot of room. what body type do you have 1 or 2? | |
GrolschWalsh |
posted on 10th Sep 09 at 22:50 |
what do you mean by convert it to V pulley? Sorry if im sounding a bit simple on these matters, im not a mechanic, a bit of a have a go hero! | |
ripley |
posted on 10th Sep 09 at 20:51 |
hi mate convert to v pully | |
GrolschWalsh |
posted on 10th Sep 09 at 20:49 |
Hi mate, let me know how you go about doing this - I am doing the same, i.e. putting a 2 litre ecotec in this wekend, have removed power steering, but have the problem that the tensioner is part of the power steering mount, which has too come off as the corsa b engine mount goes where it was... see my other post..... ( http://www.corsasport.co.uk/board/viewthread.php?tid=517709# ) let me know if / how you get around this!!! | |
James_H |
posted on 1st Jun 08 at 07:34 |
thanks! :) | |
teddytopend |
posted on 31st May 08 at 19:38 |
yes mount the same as the xe. :thumbs: | |
James_H |
posted on 31st May 08 at 15:06 |
hi my mate is looking to put a 2.0 16v ecotec engine into his corsa b with out power steering. are thay the same mounts as the c20xe ? |