|
byrnie_2004
|
posted on 27th Jan 08 at 10:30 |
cheers mate, can tell you now that one of the bolts isn't tight, lower ball joint bolt, it wont tighten or undo ill havta cut it off
|
Limecat
|
posted on 27th Jan 08 at 05:03 |
Inner CV cannot knock the linkage, it is impossible. Check that the nuts on the lower arm/tiebar/balljoint are tight! ;)
Only round the corner from me, I am in the Grove!
|
byrnie_2004
|
posted on 26th Jan 08 at 23:33 |
Today I adjusted my gear linkage, as its never been right since i've put my engine back in (struggled to get into 2nd etc).
Now my gear selections are nice and everything is how it should be, BUT...
There is now serious knocking coming from what sounds like the drivers side inner cv joint. It's only noticable when off the accelerator or with the clutch pressed in whilst moving.
Any help would be much appreciated:thumbs:
|