|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Replacing the ECU on an S reg Corsa » Post Reply
|
andy_mk3 |
posted on 10th Dec 12 at 19:26 |
Holy thread bump | |
94corsab |
posted on 10th Dec 12 at 19:24 |
quote: ive just been to the scap yard today to replace my sisters ECU from a v reg to another v reg 12v petrol and i just got told to get the transponder which just slides off the ignition barrel aswell you need to unplug a cable from the transponder (i think) and the ECU as far as i know is in a really or quad place underneath the coolant tank and on the side of the engine as well i had to remove the battery and the battery tray aswell as the coolant tank all for something that is no bigger than a bar of galaxy with to plug like sockets with this wierd hindge on both of the plugs and the ECU only has 3 small star drive nut or bolt that hold this ECU on. | |
kangarolf |
posted on 26th Oct 07 at 13:47 |
Hi all, | |
kangarolf |
posted on 16th Oct 07 at 12:01 |
Its a 1389cc injection breeze 1998 (S) | |
Dave A |
posted on 16th Oct 07 at 11:41 |
what engine size? we may have some in stock. also get the 4 letter code from the ecu. (on a sticker on the ecu) | |
DYL |
posted on 16th Oct 07 at 11:37 |
i got the same problem! but ichanged engine. | |
kangarolf |
posted on 16th Oct 07 at 07:53 |
And if it is an immobiliser I'll need the key/barrel and the transponder..? Key barrel obvious enough where they go! Where is the transponder located...? Is there a way to get them reset using one of the fault computers you can buy or is that a Vx garage only job..? | |
dean101287 |
posted on 15th Oct 07 at 19:18 |
i would of thought that you can just replace it as long as it aint an imobilzer model. | |
kangarolf |
posted on 15th Oct 07 at 17:58 |
Hi all, |