|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Remote Central Locking - indicators flash wire ? » Post Reply
|
djice56 |
posted on 7th Jul 07 at 18:36 |
the indicator wires are black with green for right and black with white for left side these can be located in the main loom behind the glove box hope this helps as i fit cobra alarms at work steve | |
AlunJ |
posted on 5th Jul 07 at 12:03 |
Okay, thanks alot mate you're a star. As I say mine works but the one button will unlock and lock the car, but the other will lock it and flash all the dash lights on for a second for some reason, anyone thanks mate, i'll have a look when I get a chance :) | |
amzee |
posted on 4th Jul 07 at 23:41 |
okay from the remote central locking controller i used only 4 wires.... | |
AlunJ |
posted on 3rd Jul 07 at 12:31 |
Thanks mate, it'll help somewhat, you haven't written down which colour wires on the remote control ecu connect to which colour wires on the original cdl ecu have you? | |
amzee |
posted on 2nd Jul 07 at 22:05 |
heres the link to my remote central locking instructions that came with my kit. | |
AlunJ |
posted on 2nd Jul 07 at 10:23 |
thanks alot mate :) | |
amzee |
posted on 30th Jun 07 at 12:21 |
i see how you mean...could anyone provide me with a wiring diagram and what diodes i need to buy from maplins to make this work. | |
AlunJ |
posted on 30th Jun 07 at 12:08 |
quote: no i meant could you post the wiring for the whole of the remote system? I just want to check if mine is correct | |
Richie |
posted on 30th Jun 07 at 12:06 |
As arbi said you will need to use the one wire to split off onto wires with diodes fitted. | |
amzee |
posted on 29th Jun 07 at 20:19 |
there isnt hardly any wiring...just one posative wire which flashes the indicator..... | |
arbi12 |
posted on 29th Jun 07 at 15:50 |
off the top of my head i think its black and green and black and white wire from indicator stalk under steering cowl , but you will need to diode these wires as you only have 1 wire so when your car is running and you indicate both sides will light up pm me and i will send you diagram | |
AlunJ |
posted on 29th Jun 07 at 08:19 |
you couldn't post your wiring for the actual rem ote as you have it could you please? I've got mine installed but its not perfect... | |
amzee |
posted on 27th Jun 07 at 19:53 |
ive had a look behind the heater panel at the hazard light switch but cant seem to figure it out which wire(s) are needed...so now ive turned for help.... | |
pdwhelan |
posted on 27th Jun 07 at 19:48 |
hmm i know it seems strange but could it be wired up to somthing to do with the hazzard light switch! | |
amzee |
posted on 27th Jun 07 at 19:30 |
Hey all, im new here and i have a standard corsa B 1998 with central locking. Basicaly i purchased a addon remote central locking kit which ive wired up and is working with the original central locking that came with the car. |