|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » braking problem » Post Reply
|
madjim |
posted on 1st Mar 07 at 20:20 |
clamp off each flexi pipe in turn or in pairs then pump the pedal when it goes hard the fault, should be with what ever comes after the flexi or sometimes the flexi itself | |
Kano |
posted on 1st Mar 07 at 19:32 |
More than likely just needing bled mate.. Wouldn't go replacing the master cylinder till you've given bleeding them a bash.. | |
Dave A |
posted on 1st Mar 07 at 18:19 |
quote: if thats happeneing then fluid is getting past the MC seals or out to atmosphere via a leak. | |
johnhara1 |
posted on 1st Mar 07 at 16:12 |
The pedal should get v hard with the ignition off and once the ignition is on the servo will assist making the pedal softer. | |
chris_uk |
posted on 1st Mar 07 at 15:59 |
no leaks as i put something down and no drips or anything, topped up the level and with the ignition off it stays soft. | |
johnhara1 |
posted on 1st Mar 07 at 15:37 |
if you pump the pedal with the ignition off is the pedal solid or still v soft? | |
chris_uk |
posted on 1st Mar 07 at 15:24 |
come to move the car this afternoon, and i tried braking and the pedal was just soft :s |