|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Remote wire on headunit? » Post Reply
|
Planty02 |
posted on 7th Jan 07 at 14:42 |
Think ill have to try this on my kenwood unit - what model do both of you have - mines a 7031 | |
deano87 |
posted on 7th Jan 07 at 12:21 |
Cool. Anyone else confirm? | |
islandofshame |
posted on 6th Jan 07 at 22:07 |
yup, if u cut the blue wire on ur iso harness the date will be restored...im 99% sure this is the same case no matter what headunit u have :) | |
deano87 |
posted on 6th Jan 07 at 16:12 |
quote: I have a Kenwood headunit - if I cut the blue wire will I get the date back up on the mfd too? | |
Planty02 |
posted on 6th Jan 07 at 01:36 |
the lpf is a low pass filter switch ( From Memory) or something like that - its there to allow only certain frequencies through (80hz or below i guess in this case), if you are running a sub off this amp then you need this to be on, if you're running speakers its beeter for it to be off | |
islandofshame |
posted on 5th Jan 07 at 20:29 |
cool, decided just to go ahead with it earlier - snipped the blue wire and got ma date back on the mfd - woohoo!! | |
tom_simes |
posted on 5th Jan 07 at 18:17 |
And it needs to be a switched 12V feed, so the headunit isn't on at all times. | |
Planty02 |
posted on 5th Jan 07 at 17:38 |
yes i would try this wire - in my experience they say either remote, power or arial. All you really need is a 12v feed | |
islandofshame |
posted on 5th Jan 07 at 16:32 |
hey, |