corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Help!!! with cambelt and water pump change » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Dave A

 posted on 27th Oct 06 at 22:59

yes as long as everything is in the right position and tensioner is set correctly it will be fine. a good 10 turns on the crank by hand is a good idea first.


sarahjt28

 posted on 27th Oct 06 at 21:23

>


sarahjt28

 posted on 27th Oct 06 at 20:33

great.

So as long as all the timing marks are lined up, and the tensioner is pointing to the correct line, i can start her up?


Dave A

 posted on 27th Oct 06 at 20:28

if the waterpump isnt positioned correctly the belt wont be right either.


sarahjt28

 posted on 27th Oct 06 at 20:22

Hi,

Have just changed the cam belt and water pump on my x16xe. I have tensioned the belt, and turned it over twice and the needle is still in the correct place. However, i am a little worried that i didnt put the water pump back in the correct place.

If the water pump was slightly out, would the point on the tensioner be at the right place,

Is the point on the tensioner supposed to flutter when you turn the engine over?

Thanks