|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » What inlet for a Lexmaul » Post Reply
|
Rob_Lee |
posted on 3rd Oct 06 at 07:19 |
anyone know part number or model they are on? | |
Robin |
posted on 2nd Oct 06 at 19:01 |
you can buy them from vauxhall, but they have to come from germany, and take ages. | |
Rob_Lee |
posted on 2nd Oct 06 at 12:34 |
yeah i've got some sheeting from work... ill begin cutting... prob weld it to the inlet to save hassle | |
Stu_22 |
posted on 2nd Oct 06 at 12:14 |
Not sure not seen these blanking pates from vaux. They look like a thin plate sesigned to be used with the egr valve. | |
Rob_Lee |
posted on 2nd Oct 06 at 11:26 |
Yeah but i have a C16xe and they dont have a EGR system. | |
Stu_22 |
posted on 2nd Oct 06 at 11:21 |
EGR is on the lower inlet not sure on how think the vauxhall ones are but one I gad and sold on was atleast 5mm thick | |
willhouse |
posted on 2nd Oct 06 at 11:17 |
i dont think you need an egr blank for the lexmaul as it keeps the throttle body in the original position | |
Rob_Lee |
posted on 2nd Oct 06 at 07:24 |
Get them from Vauxhall? | |
Stu_22 |
posted on 1st Oct 06 at 21:27 |
yes | |
Rob_Lee |
posted on 1st Oct 06 at 18:12 |
Cheers Rob :) | |
RobHayes |
posted on 1st Oct 06 at 18:08 |
x16xe lower inlet | |
Rob_Lee |
posted on 1st Oct 06 at 18:00 |
Should be recieving the Lexmaul in the week |