corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » What inlet for a Lexmaul » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Rob_Lee

 posted on 3rd Oct 06 at 07:19

anyone know part number or model they are on?


Robin

 posted on 2nd Oct 06 at 19:01

you can buy them from vauxhall, but they have to come from germany, and take ages.


Rob_Lee

 posted on 2nd Oct 06 at 12:34

yeah i've got some sheeting from work... ill begin cutting... prob weld it to the inlet to save hassle


Stu_22

 posted on 2nd Oct 06 at 12:14

Not sure not seen these blanking pates from vaux. They look like a thin plate sesigned to be used with the egr valve.

You dont have one so just make one from some 3-4mm alu sheet


Rob_Lee

 posted on 2nd Oct 06 at 11:26

Yeah but i have a C16xe and they dont have a EGR system.

Im putting on the X16xe lower inlet which will have EGR system. I need to block it off.

Can i get a blanking plate from vauxhall or do i need to get one made up?


Stu_22

 posted on 2nd Oct 06 at 11:21

EGR is on the lower inlet not sure on how think the vauxhall ones are but one I gad and sold on was atleast 5mm thick


willhouse

 posted on 2nd Oct 06 at 11:17

i dont think you need an egr blank for the lexmaul as it keeps the throttle body in the original position


Rob_Lee

 posted on 2nd Oct 06 at 07:24

Get them from Vauxhall?


Stu_22

 posted on 1st Oct 06 at 21:27

yes


Rob_Lee

 posted on 1st Oct 06 at 18:12

Cheers Rob :)

Im gonna need to get an EGR blank then aren't i?


RobHayes

 posted on 1st Oct 06 at 18:08

x16xe lower inlet


Rob_Lee

 posted on 1st Oct 06 at 18:00

Should be recieving the Lexmaul in the week

Just a quick question what lower inlet do i use???

Cheers Rob