|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 1999 Corsa C20XE Conversion, can i rig up my 16pin plug to read fault codes? » Post Reply
|
Dave A |
posted on 3rd Apr 06 at 19:12 |
erm, well you could, but you would have to just connect up the diagnostic wire to the relevant wire on the plug. | |
broster |
posted on 3rd Apr 06 at 18:54 |
corsaBOB, when you do that does it mean you cant hook it up to a diag reader | |
Dave A |
posted on 3rd Apr 06 at 18:30 |
just put a switch between the diagnostic wire and earth. that way when you want to check for for fault codes you just flick the switch. | |
X 60RSA |
posted on 3rd Apr 06 at 18:11 |
Yes mate but want to do a top notch job, everything as new as i can get it. | |
shane2corsa |
posted on 3rd Apr 06 at 17:07 |
u having an XE dave? | |
X 60RSA |
posted on 3rd Apr 06 at 16:38 |
As the title says. I have a 1999 corsa b, I'm going to pick up the XE this weekend and i'm wondering if i can rig up my 16pin fault plug to the XE ECU, or will i need to change it to a 10pin plug like the older corsa b's have.....or won't i be able to read fault codes at all........ |