|
|
Cybermonkey
|
posted on 16th Dec 05 at 11:36 |
can be skimmed if its only warped a little. check the oil though for contamination. thats a surefire way that water is in the oilways. good luck
|
sxibeast
|
posted on 16th Dec 05 at 11:10 |
uh oh! Not what i wanted to hear but cheers mate! there only seems to be white smoke from the exhaust on start up, otherwise thers none whilst going along. i filled up the tank again so will see how quickly this empties this time.
if the head is warped, could it be skimmed back to square, or is it a new head that has to be put on?
|
Cybermonkey
|
posted on 16th Dec 05 at 05:36 |
ouch, sounds like serious gasket failure if its emptying the expansion tank too, any white gunk in the oil and lots of white smoke from exhaust? if so then its deffo head gasket failure, and with the rate that it has been emptying coolant, i wouldnt be suprised if the head is warped
|
sxibeast
|
posted on 16th Dec 05 at 01:50 |
Hi guys!
Ive never seen what mess a head gasket failure makes under the bonnet but could this possibley be one?
Driving the gfs corsa (1.2 8v) the temp gauge almost hit the red. Stopped the car and checked the water in the bottle (very 'rusty' looking in bottle) and it was bone dry! Filled it up, ran it then topped it up again to ensure the water had gone round but noticed the whole block was covered in thick oil. Drove the car home opened the bonnet and there seemed to be a trickle of bown water coming from the side (where a gasket may be i wonder as there seemed to be something looking like 1 poking out abit) and was hissing too. Loss in pressure perhaps in a cylinder? Serious gasket failure? Is it relativley easy to do over a weekend? The cars gota do a trip to worthing and back so i need the old girl working!
Help me!
Cheers!
Jon
|
