corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » ecu » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

corsapaul

 posted on 23rd Oct 05 at 19:23

WILL DO


Dave A

 posted on 23rd Oct 05 at 19:22

did they plug in ok?

check both looms have the same wires going to the same pin on the ecu


corsapaul

 posted on 23rd Oct 05 at 19:20

ON THE ECU SIDE OF THE LOOM THERE IS A RED PLUG AND THERE IS A YELLOW 1 ON 1 AND A WHITE 1 ON THE OTHER.BBB


Dave A

 posted on 23rd Oct 05 at 19:16

if both engines are from a x16xe you should be ok with changing just the engines over. are the plugs on the end of the looms the same colour in both cars?


corsapaul

 posted on 23rd Oct 05 at 19:14

NO TO LOOM, TRANSPONDER PICKUP? WOTS THAT THEN?


Dave A

 posted on 23rd Oct 05 at 19:12

wouldnt even start if it was the transponder.

did you swap all the loom and ecu/chip/transponder pickup over?


corsapaul

 posted on 23rd Oct 05 at 19:09

YEAH ANY IDEAS THEN. CUD IT BE ANYTHING 2 DO WITH THE TRANSPONDER


Dave A

 posted on 23rd Oct 05 at 19:08

no, the c16xe had a black tiop inlet and the x16xe had a silver one.

so they were both x16xe's?


corsapaul

 posted on 23rd Oct 05 at 19:06

NO BOTH HAD SILVER I BELIEVE THAT WAS THE DIFFERENCE BETWEEN THE 1400'SG


Dave A

 posted on 23rd Oct 05 at 19:05

did one have a black top inlet and one a silver metal one?


corsapaul

 posted on 23rd Oct 05 at 19:04

SORRY GOT MY SELF CONFUSED SO HOW COMES THEY MADE THE GSI WITH THE ECOTEC IN AND THE C16 IS THE SOHC ENGINE ISNT IT. U HAVE ANY IDEAS THEN AS THEY ARE OBVIOUSLY BOTH X16S THEN BUT THEY DID HAVE A FEW DIFFERENCES ON THE ENGINES EVEN THO THEY WERE BOTH THE SAME CODE


Dave A

 posted on 23rd Oct 05 at 19:01

c16xe runs a totally different loom, has a air mass meter instead of a map sensor, doesnt have the egr system or secondary air pump, different ecu, different cams, and is not an ecotech


corsapaul

 posted on 23rd Oct 05 at 18:59

HOWS THAT LIKE?


Dave A

 posted on 23rd Oct 05 at 18:58

quote:
Originally posted by corsapaul
ORIGIONAL WAS A C16 AND THE 1 I PUT IN WAS A X16


c16 and x16xe's are not the same.


corsapaul

 posted on 23rd Oct 05 at 18:57

WOT CAPS U ON ABOUT. THE ENGINE IS EXACTLY THE SAME BOTH 16 V ECOTECS SO DONT NEED TO CHANGE WOT U JUST SAID


Dave A

 posted on 23rd Oct 05 at 18:53

oh, and CAPS ARE HARD TO READ. :lol:


Dave A

 posted on 23rd Oct 05 at 18:53

did you fit all the x16xe stuff on?

i.e loom, map sensor, fuel tank vent valve, secondary air pump etc....


corsapaul

 posted on 23rd Oct 05 at 18:47

ORIGIONAL WAS A C16 AND THE 1 I PUT IN WAS A X16


Dave A

 posted on 23rd Oct 05 at 18:41

was the original engine in the gsi a c16xe or an x16xe?


corsapaul

 posted on 23rd Oct 05 at 18:29

I HAVE JUST PUT A 1.6 16V ENGINE OUTOF MY CORSA SPORT IN MY GIRLFRIENDS CORSA GSI, I HAVE JUST LEFT THE GSI ECU IN IT BUT THE CAR WONT REV ABOVE 4.5 RPM OR GO ABOVE 85 MPH, SO I TRYED TO PUT MY SPORT ECU IN AND IT WILL START BUT THEN JUST CUTS OUT STRAIGHT AWAY AND BODY GOT ANY IDEAS OR HAD THE SAME PROBLEM? ANY HELP WOULD BE MUCH APPRECIATED