|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » boot pop wiring..... » Post Reply
|
JUGGA |
posted on 5th Sep 05 at 18:09 |
thanks guys for the help. i bought a fuse holder from maplins for 49p was the wrong one, went back bought another for 29p was the wrong one so though f*ck it, i just wired it to the legs of the fuse. done what everyone said followed the diagram and ive sorted it now, wish i had a switch that switches off itself tho, cos if i dont turn it off after popping it then the popper will blow up again. all working now tho. | |
M333KS D |
posted on 5th Sep 05 at 16:26 |
this is the basic idea and probable the best way to do it, but personally i would put the fuse BEFORE the switch, so that if theres a surge of power it wont blow ur switch, but its up to u! and as for it keep popping, i personally would strip it out, just simply put 2 wires to each end of the soleniod and just touch them onto the battery, if it works correctly then completely re-wire it. if it keeps popping then your solenoid is fooked. (this way just determines what part of the circuit is at fault) let me know how u get on, u2u me if you want more info mate! | |
Dan Lewis |
posted on 5th Sep 05 at 10:35 |
| |
J200RSA |
posted on 5th Sep 05 at 10:24 |
eh? summat wrong there m8 an i don't kno wot, soz i don't think i can help, hope u fix it m8 :thunbs: | |
JUGGA |
posted on 5th Sep 05 at 00:08 |
ok ive done what a few of you have said now... | |
J200RSA |
posted on 4th Sep 05 at 20:36 |
:lol: u2u'd m8 :thumbs: | |
JUGGA |
posted on 4th Sep 05 at 20:26 |
no fuse in it, how do i go about mounting a fuse in the thign wire? lol..... | |
J200RSA |
posted on 4th Sep 05 at 20:16 |
mine is a wire frm the boot to a fuse to a switch then another wire from the switch 2 the battery an thats workin wiv me m8? urs wired up like that? if not try it an tell me how it goes, fingers crossed it should :thumbs: | |
J200RSA |
posted on 4th Sep 05 at 20:13 |
u fused it m8? | |
JUGGA |
posted on 4th Sep 05 at 20:04 |
hi mate, | |
J200RSA |
posted on 4th Sep 05 at 19:32 |
i have a boot popper an they are a headache @ times, but mine is set up the same as M333KS D, its a lot easier 2 do like that and i'm currently using a switch instead of a button cos its easier 2 pop, if i wor u i'd do the same an leave the wiper alone m8, but its up 2 u :thumbs: | |
JUGGA |
posted on 4th Sep 05 at 17:43 |
ttt | |
JUGGA |
posted on 4th Sep 05 at 13:26 |
ive changed the switch and its on constantly still. no matter what, im using the only 2 available wires with the right connectors on to attach to solinoid as i did before, cant get my head around it, pi55ing me off. thank f8ck im selling this car soon, get away from vauxhalls. | |
JUGGA |
posted on 4th Sep 05 at 12:48 |
thanks, i have a spare stalk so i will try that, if i still get the same problem then what? could it be the relay? | |
Ally |
posted on 4th Sep 05 at 11:24 |
If its activated all the time then test the wires for current, if there is constant current then the wiper switch is fucked and will need replacing. | |
M333KS D |
posted on 4th Sep 05 at 11:17 |
well with my boot pop, i just ran 1 cable to a switch from batt. then from switch to boot pop, then i just connected the grnd cable to a bolt in the boot lid, this i find is the most simple way. i know that you are doing this in effect with you rear wiper switch, but i may have damaged it when you dissconected-re-connected it. it seems to me like the switch is fooked and you have just got a permanent feed running straight through the switch, i would change it. (hope thats not too confusin) | |
JUGGA |
posted on 4th Sep 05 at 01:29 |
ttt | |
JUGGA |
posted on 3rd Sep 05 at 17:01 |
anyone??? | |
JUGGA |
posted on 3rd Sep 05 at 16:34 |
i had my boot pop all setup but when i disconnected it for a couple of months for some reason... |